Description

Hydrolab – Water treatment – HLP 5

The HLP demineralizers are the most popular tap water powered devices that meet all the requirements of any modern laboratory in terms of demand for water suitable for analytical and instrumental purposes. Obtained water with conductivity below 0.06 µS/cm meets the requirements of: ISO 3696:1999, ASTM, CLSI, EP. The resulting water can be used for instrumental analysis AAS, ICP/MS, IC, HPLC, GC (depending on the model).

– Fed by tap water.
– Water purification levels:
– sediment pre-filter 5µm,
– integrated module (sediment-carbon-softening),
– reverse osmosis,
– double demineralization on a mixed ionex resin.
– Efficiency min. 5-7 dm3/h.
– Demineralized water conductivity < 0,06 μS/cm.
– Water intake point – second purity class (PN-EN ISO 3696:1999, ASTM, CLSI).
– Tank 10 dm3.
– Obtained water may be used for instrumental analyses AAS and for general-purpose research.
– Fed by cold water: 5-40°C.
– Power supply: 230V/50Hz.

Technical specification:

– The device works under tap water pressure.
– Fed by tap water.
– Water purification levels:
• sediment pre-filter 5µm,
• integrated module (sediment-carbon-softening),
• reverse osmosis,
• demineralization on a mixed ionex resin.
– Efficiency min. 5-7 dm3/h.
– Demineralized water conductivity < 0,06 μS/cm.
– Unattended and automated.
– The possibility of equipped with a pump 24V increasing feed water pressure.
– Water intake point with second purity class (PN-EN ISO 3696:1999, ASTM, CLSI) – nozzle reach min. 2 m, equipped with a 10 dm3 pressure tank.
– The possibility of installing additional water intake point for general-purpose water (third class (PN-EN ISO 3696:1999)).
– The possibility of installing additional water intake point with first class (PN-EN ISO 3696:1999 – with a 0,2μm microfiltration capsule).
– Mobile, adjustable inox arm holding water collection points – available adjustment ranges: up/down, front/back, left/right.
– Optional replacement with a bigger tank (40 dm3, 80 dm3 and more).
– Automated system shutdown when the tank is full.
– Optional connection to an autoclave, washer machine etc.
– Maintenance procedures may be performed by the user (easy replacement of disposables).
– Min. feed water pressure: 3 bar.
– Fed by cold water: 5-40°C.
– Power supply: 230V/50Hz.
– Can be installed by the user.
– Acid-proof stainless steel (inox) housing.
Dimensions (SxGxW): 235x470x510 mm
Tank 10l: height: 390 mm, diameter: 250 mm

Hydrolab – Vattenrening – HPL 5

Hydrolab – Produktkatalog

Hydrolab – brochure

LEASE / RENT / INSTALLMENT

Our collaboration with Svea means that you can quickly and easily get a proposal for financing that suits your needs Financing up to 100%. You do not have to tie up your capital. Read more about leasing and all-risk insurance.

Invest now in the right equipment, to ensure your competitiveness, capacity and access to vital equipment Spread the cost over the time the equipment is used. The equipment as collateral for the financing.