Climatic chamber / Climatic cabinet 749 liters
Call 042-300 91 30 or email info@labteamet.com
Peltier technology in KKP series provides stable, silent, vibration free climatic conditions, keeping superior temperature variation and fluctuation, and it’s space-saving. The tests performed at a temperature close to the ambient temperature shows the impressive economy of the heating and cooling concept with Peltier thanks to which KKP doesn’t require any refrigerant and is therefore nearly maintenance-free. Due to the fact that the efficiency of Peltier appliances in certain conditions is much better than of climate chambers with refrigerant dependent cooling systems, the KKP 240 makes a significant contribution to improving the climate balance.
The KKP constant climatic chambers with a steam humidifier do not emit ultrasounds and therefore allow insects breeding (e.g. Drosophila melanogaster). Compared to the KK chambers, they feature an extended temperature and humidity range and can be used for tests of electronics, plastic or building materials.
Steam humidifier in the KKP models is an energy-saving solution based on an aluminum heating block and a peristaltic pump controlled by a stepper motor. This humidifier has a very fast heating time and enables the dosing of precisely measured amounts of water. Operation in ECO mode (the block heats up only when it detects the need for dosing moisture to the chamber) saves energy.
Climate testing points according to ICH Q1 A (R2) Guidelines.| Order number: */A | door with viewing window |
| Order number: */P INOX | Stainless steel wire shelf INOX |
| Order number: */PP | Perforated shelf |
| Order number: */PW | Reinforced shelf |
| Order number: KUW GN*/* | Stainless steel bowls |
| Order number: GNZ | Internal socket |
| Order number: KK/CP | Low water level sensor |
| Order number: BRT/*/L or IQ/OQ/PQ | Calibration and IQ, OQ, PQ qualification |
| Order number: BPP 12 | Battery backup for display |
| Order number: PORT ALARM | Dry alarm contact |
| Order number: OCZ/20 | Non-standard access port 20 mm |
| Order number: OCZ/30 | Additional access port 30 mm |
| Order number: OCZ/60 | Non-standard access port 60 mm |
| Order number: OCZ/100 | Non-standard access port 100 mm |
| Order number: KD | Access control |
| TECHNICAL DATA | |
| air convection | forced |
| chamber capacity [l] | 749 |
| working capacity [l] | 749 |
| controller | microprocessor PID |
| display | 7″ full colour touch screen |
| TEMPERATURE AND HUMIDITY | |
| Working temperature range without humidity [°C] | 0…+70 (max 20°C below ambient temp.) |
| Temperature variation (spatial) at 40°C [+/-°C] | ±0,2 |
| Temperature fluctuation (time) at 40°C [+/-°C] | ±0,1 |
| Working temperature range with humidity [°C] | +5…+70 (max 20°C below ambient temp.) |
| temperature resolution every … [°C] | 0,1 |
| Temperature variation (spatial) at 40°C, 75% RH [°C] | ±0,2 |
| Temperature fluctuation (time) at 40°C, 75% RH [°C] | ±0,1 |
| Temperature variation (spatial) at 25°C, 60% RH [°C] | ±0,2 |
| Temperature fluctuation (time) at 25°C, 60% RH [°C] | ±0,1 |
| temperature protection | class 3.3 to DIN 12880 |
| relative humidity range [%] | 10…90 (see chart for details) |
| humidity resolution every … [%] | 0,1 |
| Humidity variation (spatial) at 40°C, 75% RH [+/-%RH] | < ±1,0 |
| Humidity fluctuation (time) at 40°C, 75% RH [+/-%RH] | ±0,3 |
| Humidity variation (spatial) at 25°C, 60% RH [+/-%RH] | ±0,8 |
| Humidity fluctuation (time) at 25°C, 60% RH [+/-%RH] | ±0,4 |
| Recovery time to set values after 30 sec door open at 40°C, 75% RH [min] | 23 |
 |
|
| CHAMBER | |
| door type | 1 external solid door, 1 internal glass door |
| interior | |
| Smart PRO | acid-proof stainless steel to DIN 1.4301 |
| IG Smart PRO | acid-proof stainless steel to DIN 1.4301 |
| housing | |
| Smart PRO | powder coated sheet |
| IG Smart PRO | stainless steel linen finish |
| overall dims [mm] /1/ | |
| width A | 1400 |
| height B | 1580 |
| depth C | 1040 |
| internal dims [mm] | |
| width D | 1040 |
| height E | 1200 |
| depth F | 600 |
 |
|
| shelves (standard | max) | 3 | 16 |
| max shelf workload [kg] /2/ | 100 |
| max unit workload [kg] | 140 |
| External water tank capacity [l] | 6 |
| weight [kg] | 233 |
| ELECTRICAL PARAMETERS | |
| voltage** | 230V 50-60Hz |
| nominal power [W] | 2700 |
| warranty | 24 months |
all the above technical data refer to standard units (without optional accessories)
* – variation (K) calculated for chamber as: K= +/- (T average max. – T average min.) / 2
** – other power supplies on request
1 – width doesn’t include shelve for water tank – 140mm
2 – fluctuation measured in centre of the chamber
 |
Produktblad – Klimatkammare Pol-Eko KKP750SMART PRO |
|
Pol-Eko komplett produktkatalog |
|
Constant climatic chambers KKP |
 |
Produktinfo SMART_SMART-PRO |
LEASING / HYRA / AVBETALNING
Vårt samarbete med Svea gör att du snabbt och enkelt får förslag på finansiering som passar dina behov Finansiering upp till 100%. Ni slipper binda ert kapital. Läs mer om leasing och allriskförsäkring.
Investera nu i rätt utrustning, för att säkra er konkurrenskraft, kapacitet och tillgång till vital utrustning Sprid kostnaden över den tid som utrustningen används. Utrustningen som säkerhet för finansieringen.
STOCKHOLM
LabTeam Scandinavia AB
Finlandsgatan 36
164 74 Kista
Sweden
GOTHENBURG
LabTeam Scandinavia AB
Stora Åvägen 21
436 34 Askim/Gothenburg
Sweden
LEASING / RENTAL / INSTALLMENT
Our collaboration with Svea means that you quickly and easily get proposals for financing that suits your needs Financing up to 100%. You do not have to tie up your capital. Read more about leasing and all-risk insurance.
SIGN UP FOR OUR NEWSLETTER
Your email (mandatory)
Denna förfrågan gäller endast för denna produkt. Vill du göra förfrågningar för flera produkter samtidigt så använd knappen “Förfrågan (flera produkter)” på respektive produktsida istället och samla dina produkter under “Mina produkter” innan du skickar din förfrågan.
This request is only for this product. If you want to make requests for several products at the same time, please use the “Request (multiple products)” button on the respective product page instead and collect your products under “My products” before sending your request.
If you have added products to “My products”, don’t forget to send your price or product request as well. Feel free to create an account and all your requests will be saved under the “My Account” page.
